craigslist | tools in chico

Tubing Bender 5/8 OD 3 inch radius (redding ca) $100

2009-12-26T18:25:04-08:00

For sale: One tubing bender 5/8 inch outside diameter and will bend a 3 inch radius. It is a racheting type and is manufactured by Parker Hannifin. It is in good condition, a high-quality American-made tool. If interested, please call 530-241-6418; I cannot return email. Cash only - no trades. #351-352-353-354x

Two 65000 btu portable heaters (Paradise) $150

2009-12-26T16:30:57-08:00

Two Kerosene 65000 btu heaters( Dura Heat DFA65) they both work good,, 150.00 for one or 250.00 for both

Gorilla Racks & Garage Cabinet (Chico) $50

2009-12-26T12:59:04-08:00

Wooden garage cabinet $50 with corner units. See pic.

Call Tom: 680-6230

Shopsmith (Chico,CA.) $375

2009-12-26T12:58:51-08:00

Shopsmith Mark V. $375.00 with new belt sander and scroll saw. Includes other small
parts not shown. Call 530-533-7606 8am to 4pm . M-F and 530-342-2852
evenings and weekends

Rack-it lumber rack (Chico) $200

2009-12-26T12:38:08-08:00

Rack It brand, quality heavy duty round tube steel, great condition, $200 cash or best offer. Total length 136", bed measurements 77" L x 63" W
Was on a chevy S10, but will fit most other trucks.

5th Wheel Trailer 24' deck (Paradise) $2600

2009-12-26T12:29:43-08:00

24 foot long deck, 32' overall just completed new 2X10 plank (blolted down with carrage bolts) deck 2x3 support rail on 2' centers 4" sides. 2X6 tubbing main frame,both axles have eletric brakes. Built in step to top deck with storage box. Tie down hooks and more. $2,600 Dollars (New, can also modifie to fit your needs) OBO
call 530-877-1663 Or cell 530-228-1763 E-Mail mdwight@c21selectgroup.com

MITER SAW and/or SABRE SAW 4-SALE (chico,ca) $50

2009-12-26T11:49:17-08:00

i have a miter saw and a sabre saw i will sell together or seperate the miter saw would cost more then the sabor saw and also i have framing bags that are in really good almost like new framing bags my number is (530)354-8370 if i dont answer leave a message and i will call right back and my email is tdelong1421@gmail.com thankyou

From Tim

Tools plus tool chest (Chico) $50

2009-12-26T11:06:17-08:00

Smaller size, made-in-China rollable tool chest with two drawers and a large space with door at the bottom. The two drawers are full of cheaper brand tools, which would be good for home use. $50 for everything.

CRAFTSMAN 15.6V DRILL/FLASHLIGHT KIT (CHICO AND SURROUNDING) $25

2009-12-26T09:52:19-08:00

CAN'T POST PICS.CRAIGSLIST SAYS FILE IS TO BIG.CAN SEND PICS UPON REQUEST.GREAT CRAFTSMAN DRILL.USE IT FOR YEARS UNTIL BATTERIES STOPPED HOLDING A CHARGE RECENTLY.SEARS AND e-BAY HAVE REPLACEMENTS.I ENDED UP GETTING A NEW DRILLL FOR CHRISTMAS.$25 O.B.O.THANKS FOR LOOKING.HAVE A GREAT DAY.

Gas powered industrial AIR COMPRESSOR (west of willows) $475

2009-12-26T09:37:11-08:00

I have a Industrial air compressor that has a 11hp iron bore industrial briggs and straton engine that is electric start.Runs awesome.Only thing it needs is a new pully guard.It dont effect it,but for saftey it would be nice.Asking 475.00.00 Or make me a offer.More Pics for serious people only..SORRY I WAS OUT OF TOWN FOR AWHILE AND DIDNT GET BACK TO EVERYONE THAT EMAILED ME.....

WELDER (NEW) (Oroville) $850

2009-12-26T09:30:43-08:00

110v MILLER MATIC 140 AUTO-SET. BRAN NEW. AS LITTLE AS 5 HOURS OF USE.
WELDER
TANK
CART
$850

Craftsman 10" Compound Miter Saw (Yuba City) $55

2009-12-26T09:13:10-08:00

This saw does it all need more info 530 755 4424

like new compressor (Chico) $150

2009-12-25T20:53:00-08:00

I got this compressor as part of a trade and just dont need it. It has a 13 gallon tank and comes with a air hose, air chissel, 1/2 impact gun, tire filler and blow nozzle. It works well and is quiet. Appears to have only been used a time or two as its pretty clean. 530-624-2721 if no answer, leave a message

HEDGE TRIMMER $20. (chico)

2009-12-25T20:31:31-08:00

HEDGE TRIMMER, 22'' BAR, 110 V. BRAND IS HEDGE HOG RUNS GREAT.530-624-1663

Weedeaters (Craftsman & Roby) (Chico) $25

2009-12-25T16:25:38-08:00

Craftsman Weed Wacker = Gas Trimmer 24 CC - 17in. - Runs great reliable. $20.00
Roby Gas Weed Wacker = Dual line - 37 CC - 15in. - Runs Excellent $35.00.

Call Rick if interested 530-809-0454.

Black and Decker Weed Eater (Magalia) $40

2009-12-24T20:14:21-08:00

I have an electric black and decker weed eater that is almost brand new only been used for a few minutes, just trying to get money for bills

~ Airless Paint Sprayer ~ (Chico) $800

2009-12-24T17:33:14-08:00

the pump is an electric Graco 695 G max Standard and comes with 100 ft of spray line and gun. asking $800
also have a few other rigs, gas & electric. call for details.

530) 570-5560 or (925)325-0717

Truck Lumber Rack (Oroville)

2009-12-24T16:53:37-08:00

Rack It brand, quality heavy duty round tube steel, like in the photo, good condition, $250 cash. Total length 136", bed measurements 77" L x 63" W

Poulan 16" Chainsaw (Paradise) $100

2009-12-24T16:23:01-08:00

Excellent condition. Case included. Call (530) 520-2956. Leave a message. Thanks!

1/2 matco impact wrench (chico) $165

2009-12-24T16:13:22-08:00

matco 1/2" impact wrench need to sell thank you for looking

Craftsman 13 Drawer, 26 in. Combo Tool Box (Paradise) $300

2009-12-24T13:28:41-08:00

Great Box. Perfect condition never used!!! This Box sells for $400 on Sears website. Please reply with any questions.

Gear Wrenches!!!! NEW!! (Chico) $50

2009-12-24T13:02:59-08:00

I have Three sets of gear wrenches for sale. If you would like to know more about them call me at 530-828-0998. I am selling each one at $50 each. At the store they are $80. i just need to get some money for last minute shopping.

Hitachi Framing Nails (Box of 4000) (Oroville) $20

2009-12-24T12:00:37-08:00

I have 3 unopened boxes of framing nails. They retail for $49.95 on Amazon.

I'm selling for $20 each, and there is one opened box about 3/4 full I'm selling for $10. All four boxes for $50.

Technical Details

* Fits in Hitachi NR90GR, NR83A, NR83A2, NR83A2S, NR90AC3: DW D51844, D51845: Duo-Fast CN350: Senco SN60, SN65, 1B0003N, 1B0007N: Bostitch N88RH-1, N88RH-2MCN, N95RHN-1: PC FR350, FR350MAG: Max SN890RH
* 3 1/4 by .131 SM
* 21-Degree
* Full Round Head
* Basic Bright

Central Pneumatic Blast Cabinet Model 93608 (Chico) $175

2009-12-24T11:56:54-08:00

Central Pneumatic blast cabinet model 93608..1yr old..with material..bought industrial cabinet and need this one gone..First $175 takes it..530-230-3073

Ryobi Lithium Kit 9 tools 3 batts (Chico) $335

2009-12-24T10:40:43-08:00

Ryobi lithium battery tools. I bought these this year, have receipts from Home Depot. I have upgraded, so selling old kit. All of these tools work great, all 3 batteries are lithium & in excellent condition. Circular saw has a bit of a squeal, but runs fine.

Drill
Angle Drill
Impact Screw Gun
Circular Saw
Reciprocating Saw
Flashlight
Vacuum
Orbital Sander
4" Grinder
Charger
(3) Batteries
Soft Case

Almost New Porter Cable cordless 18V Drill and Circular Saw. (Magalia) $70

2009-12-24T10:26:08-08:00

I would like to sell a top notch Porter cable cordless 18v drill and circular saw.

I bought these 2-3 months ago in chico. They were used maybe half a dozen times each or so, they are just like new still.

The saw really suprised me, it cuts through dimensional and 1" plywood just like a corded saw.

You will get the drill, the saw, 2 batteries, charger and a nice bag to carry them in.

I paid $120 plus tax just a couple months back, will sell for $70 cash, you cant beat that!

If this sells today I will include a drill amd driver set with it.

If interested please call 530-413-9212.

Honda eu1000i (sac) $520

2009-12-24T06:40:03-08:00

Great running 1000 watt geneator,just upgraded to bigger one.(916)475-4115.

HYDROBLASTER ELECT. PRESSURE WASHER (CHICO,CA) $500

2009-12-23T23:36:12-08:00

Electric motor driven Pressure washer, HYDRO BL.ASTER MODEL 325E, 2500 lbs pressure @ 3 gal/min. 5 hp BALDOR motor,single phase-230 v, Tri-plex piston /ceramic plunger pump. Equiped with Timer switch, 4 wire 12GA cord and 250 v plug . Dual Wand Pressure Gun with Variable Pressure control and 50 lf. high pressure Rubber steel braided hose. Quality Equipment at low price. Call 530-894-7300 or 530-781-2616.

Teco Variable Speed Coupling & 5 HP 3-Phase Motor (Paradise) $100

2009-12-23T22:52:05-08:00

Teco 3-Phase 5 HP Motor attached to Teco Variable Speed Coupling. Motor is Type AEABAC, 4 poles, 220/440 Volts, 14/7 Amps, Continuous Rating, 1720 RPM, Weight 47kg. Variable Speed Coupling is Type VSVSAC, Continuous Rating, 50/60 Hz, Excit. V. 80, Max. Excit. T.A. 1.1, weight 110kg, 150-1500 RPM. Output shaft diameter is 1.103" (28mm). The speed controller is brand new in the box and I don't think the motor/coupling has ever been used.

Oxygen & Acetylene Tanks, Small (Paradise/Chico) $140

2009-12-23T22:50:45-08:00

40 Cubic Foot Oxygen tank and AC2 Acetylene tank. These are customer-owned tanks that are simply exchanged for full tanks at a welding supply like MJB or Airgas in Chico. The owner only has to pay for the gas; there are no rental charges for the tanks because the customer owns the tanks. The oxygen tank sells for $100.00 (empty) and the acetylene tank for $94.00 (empty) at one of these welding supply stores. All the tanks they sell are already used, just like these. These need to be filled, but you will save $55.00 over the cost of the exact same tanks at the store.

Canvas Tool Pouch, 44 pockets, New! (Paradise, CA) $10

2009-12-23T22:48:13-08:00

Very nice, brand new, heavy duty, military-style canvas tool pouch with 44 pockets. Holds wrenches, screwdrivers, pliers, allen wrenches, etc. Folding top flap keeps tools from falling out, and it rolls up and has two webbed straps with buckles to keep it closed.

misc. Snap-On tools (Chico, Ca.)

2009-12-23T21:00:47-08:00

misc. snap-on hand tools and specialty tools. too many to list, but here are a few,,ratcheting boxend wrenches mm and std, snap ring pliers set, cordless tools, 1" drive socket, ratchet and ext. set with var. axle sockets. 5 gas analyzer, plus many many more. call 530-680-5162 for more info. i also have a parts washer(soap and water) for sale too.

DREMEL PLUNGER ROUTER ATTACHMENT MODEL #335-01 $20 OBO (Chico) $20

2009-12-23T19:23:46-08:00

Dremel Plunger Router Attachment Model #335-01. Sold at Home Depot new for $31.40. I bought this a couple years ago and have never used it. It has never been out of the box. Great last minute Holiday Gift for the woodworker in your life! Description: This Plunger Router Attachment converts your corded Rotary Tool into a plunger Router. Ideal for accurate circle cutting, adding decorative edges to your woodworking projects. For use with Dremel High-Speed Rotary Tool Models (Not included). Includes Plunge-lock in handle, Clear Base, Two depth stops, Edge guide and circle cutting guide, On-board storage for bits and wrench, Great for inlay work, edges, signs, circles, Turn you Dremel into a router great value! MFG brand Name: Dremel. MFG Model# 335-01. Specifications: Assembled Depth (in inches): 9.500 in, Assembled Height (in inches): 5.200 in, Assembled Weight (in LBS): 2.230 lb, Assembled Width (in inches): 6.000 in, Dremel and bits not included. For use with Dremel Models # 275, 285, 395, 398. Cash upon pick up only. Will not entertain, third parties, cashier checks or wires. Please don�t e-mail any commercial offers. Multiple pictures attached. Thank you for looking. If interested please contact: thru Craig's list.

Free Hit Counter Analytics!

chain saws & blowers (chico) $10

2009-12-23T14:21:24-08:00

Several working and in good shape chain saws and leaf blowers -( craftsman 2.0 14inch,) (weed eater power blower) (blaack&decker power blower) (remington 8 inch chain saw) ( paramount Power blower ) (mccullough chain saw 13 inch) (B&D power saw 8 inch) ( 2 bench grinders & buffers) (skil saw 13 inch). Prices on these var. I am open to offers. Call Ted 530 8938456. All of the tools are electric....

Graco magnum airless sprayer (Corning) $200

2009-12-23T13:57:00-08:00

Airless sprayer from home depot. Comes w/ 2 wands and hose. Call (530) 864-4119

Rigid Miter saw w/ rigid mobile stand (Corning) $300

2009-12-23T13:53:14-08:00

Rigid miter saw great condition. Includes rigid miter saw stand. Kept in garage when not in use.

Call (530) 864-4119

Price for saw alone is $299.99. Stand is $169.99

CRAFTSMAN 3/8 DRILL/DRIVER W/ 5 1/2 CIRCULAR SAW COMBO (OROVILLE) $80

2009-12-23T09:59:36-08:00

We a Craftsman drill and saw combo for sale. Still is in the box and would make a great last minute gift.
We are located in Oroville,CA and can reach us at 530-534-5626

JB DV-142N VACUUM PUMP (Oroville) $135

2009-12-23T09:50:18-08:00

We have used JB vacuum pump. It features a 5CFM and is 2 stage. It is in working order.
We are located in Oroville,CA and can reach us at 530-534-5626

WARN WORKS H1000AC HOIST (Oroville) $700

2009-12-23T09:44:53-08:00

We have a gently used Warn Works H1000AC Hoist for sale has the mounting plate and controller.
We are located in Oroville,CA and you can reach us at 530-534-5626

CLIMBING BELT (LIVE OAK CA 95953) $75

2009-12-22T20:19:14-08:00

NICE CLIMBING BELT .WAS A COMCAST CONTRACTOR .LIKE NEW FITS A WASTE SIZE UP TO 36 HAS EXTRA POUCH ON BELT WITH LANARD.CALL 530 695 6229

Lincoln 225 Stick Welder (Paradise) $90

2009-12-22T19:52:12-08:00

Best stick welding model, old standby that is still in high demand today. Works good, includes extras. Even has the wheel kit.

873-0757

oxy acetylene tanks (Oroville) $110

2009-12-22T19:39:36-08:00

One is about 3ft and the other is about 4ft. I would like to trade for blacksmith items. Clif 530 532 0189

Ind Drill Press (Chico) $250

2009-12-22T17:05:06-08:00

Sorry no pictures. Very heavy duty and it works. General Electric motor at 1 hp, 1725rpm 135/ 230 volts, attached with a Reyolds side by side drill coupling. The base collar is broken but can be welded. Come with heavy duty table/ stand and pnuentic attachment electic safety. This is a working press and easy movable, but will worthiness in labor
James
(530) 342-1907
quail@chiconet.com
jaz.crow@yahoo.com

Electric Porter Cable Drill (Chico)

2009-12-22T15:57:17-08:00

This is an older drill but still in excellent working condition. I am willing to throw in some other tools or accessories for the right price. I would like to sell this for at least $20. Please e-mail me for pictures and with an offer. I look forward to hearing from you.

Bakers rack for sale also scoffolding

2009-12-22T11:44:44-08:00

I have a great heavy duty Bakers rack for sale. It is appox.3' wide 5' long and 6' tall.... This rack is in great condition. I am asking 150.00 for the rack....If interested please email me and I will get back to you asap.... Thanks Jim I also have 3 tiers of 5x7 scoffolding and one set of wheels...Asking 300.00 for all 3 sets If you buy all bakers rack and all 3 tiers of scaffolding.. I will take 400.00 for all. And you save 50 bucks

3 tiers 5'x7' scaffolding with wheels

2009-12-22T11:44:00-08:00

I have 3 tiers of scaffolling for sale.. one set of wheels..... and six cross members..... I will sell for 300.00 or best offer.. I also have a Bakers rack for 150.00. If you take all I will sale for 400.00 If interested please send email and I will get back to you asap...Thanks Jim

Northern Tools 1250lbs 2 Way Engine Load Leveler (In Chico)

2009-12-22T11:29:49-08:00

Northern Tools 1250lbs 2 Way Engine Load Leveler. Only used this twice. Pulled a motor out. Put one back in. Still in great condition. Selling it for $25. That�s half of new and not including the shipping if you were to buy new.

Phone 530.828.6117

Set of propane torches etc. (Magalia) $20

2009-12-22T09:59:16-08:00

I have several propane toches and various other extras like a soldering tip etc I would like to sell. Hopefully you can see whats there in the picture :)

Will sell the lot for $20 cash. If interested call 530-413-9212

Almost new 18V Porter Cable Drill and Circular Saw set. (Magalia) $80

2009-12-22T09:21:33-08:00

I would like to sell my 18V Porter Cable cordless drill and circular saw set. It comes with the drill, circular saw, 2 batteries, the charger and a nice canvas bag to hold it all.

I bought this set a few months back intending to do some remodeling but my back is not putting up with it. These have only been used a few times each.

The saw works suprisingly well for a cordless, it rips through 1" plywood and dimensional lumber like it was butter, the drill is excellent aswell.

I paid $120 plus tax for this, will sell for $80 cash. If interested call 530-413-9212.

Hardinge Chucker (Chico) $7500

2009-12-21T19:31:25-08:00

This machine is extremely tight. Holds close tolerances, comes with some 5C collets and Hardinge 3 jaw chuck. Pneumatic threading, 3 phase. Local pickup only, cash only, no checks 530-965-3025.
Offer expires 5:00 PM, December 23, 2009

Bridgeport Style Mill (Chico) $3600

2009-12-21T19:27:22-08:00

Bridgeport clone mill, identical right down to the color. Step pulley head, 3 phase, comes with 6" Kurt Anglock vise and some collets. Local pickup only, cash only, no checks. 530-965-3025
Offer expires 5:00 PM, December 23, 2009

Compressor, Jack Hammer, Hose (Chico) $800

2009-12-21T15:49:44-08:00

Compressor & Jack Hammer & Hose

Call Dan (530)321-3117

Rotary Mower with Grass Catcher (Chico, CA) $30

2009-12-21T15:48:20-08:00

Rotary mower, self propelled with grass catcher.
Call Ron: 530-521-8471.

Sealcoat Pot (Chico) $500

2009-12-21T15:47:38-08:00

Call Dan (530)321-3117

oxy acetylene tanks (oroville) $150

2009-12-21T15:40:00-08:00

tanks one oxygen one acetylene 370 3653

cement mixer $100

2009-12-21T15:29:39-08:00

runs good drum a little beat up 586-1382

drywall taping tools bazooka & more (paradise) $1700

2009-12-21T13:11:07-08:00

set of taping tools take 1700 for all
tape tech bazookain real good shape
pump
two flat boxes 10inch & 12
one 2inch nail spotter
2 boxhandles
corner roller
4ft. stillts call john530-570-0252

Victor Nitrogen regulator (Chico) $80

2009-12-21T09:23:24-08:00

I have a lightly used Victor regulator for Nitrogen bottles. I used it one season of racing to air tires and run an inpact gun. It is in excellent shape and priced well below market price. It has 200PSI delivery capability.
Call weekdays 530-342-0422 or email above. Thanks.

ryobi weed eater (chico) $35

2009-12-20T23:03:06-08:00

this tool is about two yrs. old and i might have a roto til attachment

impact gun (chico) $40

2009-12-20T23:02:28-08:00

electric craftsman half inch drive.older model exellent condition

Cutting Torch and Gauges (Chico) $30

2009-12-20T18:31:54-08:00

Cutting Torch and Gauges. Harris brand gauges. Work fine however the cutting torch needs new O-rings or to be looked at. Great Christmas gift for $30.00.

8000 WATT GENERATOR (Durham 894-1773) $800

2009-12-20T16:11:27-08:00

TROY- BUILT generator 15 HP. 8000 watts electric start runs great dont need it anymore.

Emglo commerical air compressor (Paradise) $300

2009-12-20T15:20:35-08:00

Twin cylinder wheel barrow style. The Kohler 8hp engine ran perfect about 8 months ago then as usaual after you let something sit, thats right, it doesnt want to start now. A carb cleaning and it would go fine. It was mounted on my flatbed trailer for running tools and airing up on trips. The trailer is for sale so this needs to go as well. thanks

Lincoln Welder/Generator (Paradise) $800

2009-12-20T15:15:59-08:00

The welder/generator is great to have on any wheeling trip but I'm selling my trailer (where it was mounted) so I have no need for it now. It ran perfect then I didn't start it for a while. Now I realized its rubber fuel line coming from carb is sun cracked and leaking. Might need a carb cleaning. Not a big deal. Has about 20-30 foot welding leads and boxes of welding rods.

6" rabbetting central machinery jointer $150

2009-12-20T14:59:17-08:00

Jointers only been used a handfull of times works great just don't ever use it and I need the cash for Christmas. I could be flexible on the price but it's already pretty low. It needs to sell by tomorrow if it doesn't I probably just won't sell it because I am leaving in the afternoon on monday and won't be back till after Christmas. Interedsted give me a call at 530-370-7023 my name is Kane.

black and decker sidewinder skil saw

2009-12-20T14:24:41-08:00

Great condition hardly been used. Comes in big green metal case. The only reason I am selling it is because I haven't had that much work and obvious reason it's christmas and I need the money. I really need to sell it this weekend I am asking 75 If interested give me a call at 530-370-7023. Also I am selling a 6 inch jointer also hardly been used and because I never use it I am selling it as well for 150 wich is a great deal.

Stinger Plus Uni-spotter 5500 (Chico) $100

2009-12-20T12:25:50-08:00

Working Stud Welder. Let me know if you have any questions.

Stant ST270 Cooling System Pressure Tester (Chico) $40

2009-12-20T12:19:25-08:00

My roommate left this behind and I have no use for it. To the best of my knowledge it works, but I don't really know what it is.

gun Paint (oroville ca) $10

2009-12-19T21:03:53-08:00

gun Paint

Scroll Saw 16" variable speed Delta (Paradise) $60

2009-12-19T16:46:36-08:00

I am selling a Delta 16" variable speed scroll saw. It has been used twice and has been collecting dust every since. It comes with extra blades the blades are the pinless variety and clip in. I am selling it because it didnt fit my needs.

Circular Saw: Porter Cable 7 1/4" model 743 - Heavy duty!! (Chico) $60

2009-12-19T16:32:12-08:00

It's in excellent condition.
This is a very nice saw....you won't be disappointed !!!

Price: $60 cash, firm.
Located in Chico.
Email you phone number and I'll call you back.

anvil for sale (Oroville) $225

2009-12-19T16:01:56-08:00

Peter Wright is about 100lbs-$225. Clif 530 532 0189

DRYWALL STILTS (CHICO) $100

2009-12-19T13:14:34-08:00

Professional grade stilts by Wallboard Tools; 19 to 31 inches. CALL 8913444

Paint sprayer (Corning) $150

2009-12-19T12:43:16-08:00

Paint sprayer that works great in door out door comercial with hose and gun I will test show before I sell. Jerry 530-824-6520

Pick-up Tool Boxes (Princeton) $150

2009-12-19T10:56:46-08:00

Jobox tool box 50"x36" (Pack Rat style) $150.00

Pick up tool box 48"x19" $50

Both are in excellent condition
Cell# 530-755-5655

Drill Press (Princeton) $100

2009-12-19T09:59:03-08:00

Craftmans 1 HP Drill Press
Execellent Condition
Cell# 530-755-5655

Air Compressor (Princeton) $100

2009-12-19T09:54:46-08:00

2 1/2 HP - 20 Gal. Ingersoll-Rand
Shop Air Compressor
Excellent Condition

carpet tool (knee kicker) (paradise) $35

2009-12-19T09:12:36-08:00

like new carpet stretcher
ORCON BRAND
ADJUSTABLE PINS FOR DIFFERENT THICKNESS OF CARPET

$35

Ed
872-5602

misc.tools for sale (oroville)

2009-12-19T01:27:36-08:00

delta drill press 9in table top new $80,c.m.t 13 pc professional router bit set new$150,makita rt angle drillw/lite new$100,makita 4in grinder new $75, porter cable sander/polisher,has misc grids/polish pads$125,craftsman all-n-one cutting tool new $100,dewalt moble stand holds a planner,chop saw,etc.$100,

Wanted Chain saw (Paradise)

2009-12-19T01:16:30-08:00

Doesn't have to be pretty just needs to work. No Electrics.

Champion 1200 watt portable Generator (Chico) $150

2009-12-18T22:08:55-08:00

I have a New (used 10 hrs) Champion 1200 watt Portable Generator. I paid $270.00 still have receipt. Need the cash $150.00. Please call if interested, ask for Robert at 707-502-5601

SORBY LATHE TOOLS (W 11TH AVE, CHICO) $375

2009-12-18T20:15:08-08:00

NINE SORBY LATHE TOOLS PLUS SHARPENING GUIDE. ONE OWNER. GREAT CONDITION! 840H small, 840H large,8003L, 842LH, 1" chisel, 810H, 843H, 1" flat nose, 38" flat nose, sharpening guide. See photo. Shown by appointment by owner. Buy entire set only. Call Phil at 530-570-0472.

SHOPSMITH MARK V MODEL 500 (W 11TH AVE, CHICO) $1600

2009-12-18T20:09:56-08:00

SHOPSMITH MARK V MODEL 500 MANUF. 3/1988. ONE OWNER, GREAT CONDITION! Comes with retractable casters, Orig. owners manual and manuals for attachments, sanding disc, 11" band saw, belt sander (505641), 3 extension tables, 1 set outrigger legs, small drum sander, large drum sander, sanding table, 4-pc brad point bit set, 2-8"
1-4" lathe tool rests, 6" lathe face plate, lathe live center, Freud 10" 50 tooth sawblade (LUB4M) Also included 8 asst. lathe tools, pen blanks and sets, 4 wood turning books. Buy all or none. Shown by appt. by owner. Call Phil at 530-570-0472.

6" chimney brush (paradise) $10

2009-12-18T19:53:15-08:00

used one time

6 " round steel brush and

2 four foot extention rods

cleans the soot out of your chimney

$10

Ed
872-5206

rotozip straight edge guide and circle cutter 3 (chico) $25

2009-12-18T19:35:36-08:00

2 in 1 rotozip straight edge guide and circle cutter 3
cuts circles from 1" to 20"
makes straight cuts nice and easy

will sell for $25 or best offer

6 foot scaffolding (Bangor, CA) $80

2009-12-18T19:32:57-08:00

I have a 6 foot scaffolding for sale that is in acceptable condition. It is still completely functional but has a lot of wear .

Miter and Circular Saw (Bangor, CA) $30

2009-12-18T19:12:58-08:00

I am selling two saws that I do not need anymore. One saw is a compound miter saw. It runs well, but could use a new blade. The other is a circular saw with the laser guide. I have been using it with a cement fiberboard blade to cut siding. I am asking $30 each. Email or call 679-0775.

RIDGID Auto-Clean�/K-30 Sink Machine (chico) $35

2009-12-18T19:10:55-08:00

ALSO COMES WITH A FREE STORAGE BAG
missing hose

Features
Clean � Cable contained inside guide hose � minimizes clean-up of hands, work areas and fixtures.
Immediate Results � Strong, durable MAXCORE� 50 cable for tough blockages.
Guide Hose � Cable contained in guide hose �minimizes clean-up of hands, work area and fixtures
AUTOFEED� � Conveniently powers cable down drain and through blockages. Aluminum paddles advance cable 20% faster
MAXCORE� 50 Cable � Includes 1/4" x 30' Inner core cable for increased strength and longer life. Provides 50% more cleaning power for tough blockages

will sell for $35 or best offer orig. $142.00

Specifications
Motor Rating: 115V, single phase, AC 1.1 Amp, 60Hz.
Motor Operating Speed: 450 RPM.
Cable: 1/4" x 30' MAXCORE� 50
Line Capacity: 3/4" - 1 1/2".
CSA approved

Shopsmith (Chico, California) $400

2009-12-18T18:12:01-08:00

Shopsmith Mark V. $400.00 with attachments. Includes other small
parts not shown. Call 530-533-7606 8am to 4pm . M-F and 530-342-2852
evenings and weekends

Shaper (Paradise) $150

2009-12-18T18:05:17-08:00

Craftsman Shaper, includes 1 cutter & mobile base.
Call Clay 877-1455

WET/DRY Vac (Chico) $50

2009-12-18T18:03:54-08:00

New RIDGID 12 gallons/5 peak wet/dry vac, still in box,$50.00 Thx

12,000 Bend pac lift (SOLD) (chico) $2500

2009-12-18T17:16:44-08:00

12,000 bend pac 4 post lift with rolling jacks still hooked up and working. reply to the email for more information

tractor jack (paradise) $35

2009-12-18T16:08:08-08:00

large heavy duty jack
for lifting tractors

i used it for pulling t-posts

excellent cond.

Ed
872-5206

Air Tools Impact and Ratchet (Red Bluff) $295

2009-12-18T10:51:58-08:00

1 used 1/2" Impact - Ingersoll Rand $100
1 used 3/8" Palm/Butterfly Ratchet - Ingersoll Rand $60
1 used 1/4" Ratchet - Ingersoll Rand $40
1 used Air Hammer with hammer bit - Snap-On $75
1 used 1/4in. 30 Die Grinder - Astro Power $20

Will sell all for $250

email is mercstang@sbcglobal.net

engine hoist with engine lever (oroville) $175

2009-12-18T10:41:26-08:00

up to 4000 lbs load depending on position folds up looks new 175.00 obo

miller a/c d/c arc welder (oroville) $225

2009-12-18T10:36:12-08:00

miller thunderbolt xl arc welder 220 volt have welding rod that goes with it. 225.00 OBO ph 530 370 3653

DUAL PURPOSE DOLLY (PARADISE) $60

2009-12-18T10:00:22-08:00

CAN BE USED UPRIGHT FOR APPLIANCES OR BOXES
CONVERTS TO 4 WHEEL CART
HEAVY DUTY
LARGE TIRES
USED TWICE TO MOVE
paid over $100.00

Ed
872-5206

large air compressor 3phase motor (Orland) $150

2009-12-18T07:29:35-08:00

large air compressor twin piston pump, 3phase motor, runs great $150.00 OBO 530-828-3712

Trade my tools for a car,truck or? Matco box,Snap on,Craftsman, ect. (Chico)

2009-12-17T18:57:57-08:00

I have a lot of tools, Matco Excellerator 8 drawer rollaway, Craftsman 8 drawer top box, Craftsman storage cabinet plus lots of specialty tools. Lots of air tools, ect. Matco AC leak sensor, Ford Rotonda, ect. Way too much to list, everything you need plus more. Snap On, Matco, Craftsman and others. I have a lot more pictures. Trade for a car, truck or? No junk, there are thousands of dollars in tools 530-781-3040

Craftsman Mech. Tools w\4 drwr Huskey Box (Chico) $220

2009-12-17T16:12:26-08:00

Craftsman Ratcheting Mechanic's tool sets (standard & metric). Plus many extras: hammers, screwdrivers, bolt and screw strippers, files, pick's, clamps, cutters, shop rags and cleaner and much more.
Looking to sell the whole lot. 831-224-5675

James